Video answer: How to fix errors with oki toner cartridges
Top best answers to the question «Oki printer troubleshooting guide»
- Check the hopping motor and the gear train for abnormal condition. Dew condensation in the printer was detected. This error tends to occur after a printer is carried in from the outsides. Leave the printer for 2 hours to half a day at room temperature, and turn on the power.
Video answer: Drum reset chip guide for oki printers - abpsc8k type
9 other answers
Set the machine as the default printer. Right-click the OKI MC873 icon on the [Devices and Printers] folder, and then select [Set as Default Printer] (if multiple drivers are installed, select [OKI MC873 (*)]). * Select the required driver type. -. The output port of the printer driver is incorrect.
If you cannot solve a problem with the following solutions, contact your dealer. Table of Problems with Printing Results. Vertical White Lines Appear. Printed Images are Fading Vertically. Printed Images are Light. White Spots and Lines Appear. Dew Condensation Appears on Printed Paper. Vertical Lines Appear.
A printer driver is not selected. Right-click the [OKI C532] icon on the [Devices and Printers] folder, and then select [Set as Default Printer]. -. The output port of the printer driver is incorrect. Specify the output port for connecting a LAN cable or USB cable. -. Nothing is displayed on the display screen.
Wipe the LED head with a soft tissue paper. Cleaning the LED Head. The toner is low. If "Toner Low" or "Toner Empty. Replace with new Toner Cartridge." appears, replace the toner cartridge. Replacing the Toner Cartridge. The lightproof film of the image drum is dirty. Wipe the lightproof film with a soft tissue paper.
The printer needs paper, but the ALARM light is not on and I cannot load the paper…..93 Problem 11: The Print Quality and Character Pitch keys on the front panel don't work…..93 Problem 12: Continuous-form paper sticks to the paper separator.....94
OKI ML 320 Elite (Microline) The following chapter describes some of the problems which occur on laser printers, and the likely sources of such problems. The advice given in this chapter is not a substitute for the troubleshooting section in a laser printer user manual, but it may give some insight about why a particular problem occurs.
Oki Data has taken care to insure that the information is complete, accurate and up-to-date. However, Oki Data assumes no responsibility for errors or omissions which may occur. All the information provided is subject to change from time to time at the sole discretion of Oki Data.
Your Oki printer has been carefully designed to give you years of safe, reliable performance. As with all electrical equipment, there are a few basic precautions you should take to avoid hurting yourself or damaging the printer: • Carefully read all setup and operating instructions. Be sure to save all documents for future reference.
Problem: The printer doesn't print when the computer sends data. Solutions: (1) The printer may be deselected. If the SEL light is out, press the SEL button to select the printer. (2) The printer cable may be loose: check the cable to be sure that it is securely connected both to the printer and to your PC.